Corrosion Control, Surface Coatings and Industrial Cleaning

Corrosion Control and Industrial Coatings Services including:

  • Removing corrosion, refurbishing and replacement of corroded parts and threaded/screwed fittings
  • Industrial coatings for corrosion control
  • Powder coating
  • Galvanising
  • Electro polishing
  • Mirror polishing
  • Industrial painting

Industrial Cleaning Including:

  • Cleaning of minor spills.
  • Cleaning of blocked pipes, static mixer tanks and equipment.
  • Surface preparation for coatings.
  • Capabilities cover chemical cleaning and high-pressure blast cleaning.

Recent Corrosion Control and Industrial Coatings Projects

Wolleebee Creek
Northern WTP
Heat Exchanger Clean

Metal Maintenance used high pressure jet rod to descale the vent condenser at the Woleebee Creek Northern WTP. The vent condenser on the brine concentrator becomes blocked and results in reduced flows.
Client: Veolia Water

Gravity Thickener Refurbishment – Luggage Point WWTP

Metal Maintenance were contracted by Veolia Water to dismantle and Refurbish Gravity Thickener, including service of the drive gearbox at the Luggage Point Advanced Wastewater Treatment Plant.
Client: Veolia Water

Mudgeeraba Water Treatment Plant – Repair Filter Outlet Assemblies

The filter outlet pipework assembly and isolation valve spindles at Mudgeeraba WTP required replacement. There was varying levels of corrosion and some surfaces are not coated to prevent corrosion.
Client: SEQ Water

Bundamba West Pump Station – New Transfer Pump Bypass

The objective of the project was to undertake the recommended pipework changes ensuring the ongoing supply of PRW to Swanbank Power Station, as the existing pipework was not designed for long term use.
Client: Veolia Water

Boonah Kalbar WTP Treated Water Reservoir Vermin Proofing

Metal Maintenance was contracted by SEQ Water to undertake vermin proofing to the treated water reservoir roofing and associated structures and fittings at the Boonah Kalbar Water Treatment Plant.
Client: SEQ Water

Fluoride Hopper Shut Off Valve Install at Mudgeeraba WTP

Concept design of gate valves that eliminates the requirement of manual handling associated with a manually operated valve. The fluoride powder sits in the valve slide and makes them difficult to fully close.
Client: SEQ Water

Scroll to Top
Head Office